When To Use Qwik-Fix Angle

Masonry and brick panels must be restricted in size to avoid façade cracking due to differential expansion and compressive stress fracturing. Differential expansion is caused by thermal fluctuations and moisture absorption.

Qwik-Fix recommends masonry support angles should be provided at every single or second story level in buildings which exceed 9m in height.

Standards: BS 5628: Part 1: 2005 or Eurocode 6

Installation Detail:

 

References:

a) Waterproof pointing detail (mastic)            b) Compressible backing rod

c) Mortar                                                           d) Compressible Filler

Enquire
© 2010 Coughlan Engineering (Tullamore) Ltd t/a Qwik Fixings
Registered in Ireland # 281833
Riverside, Tullamore,
County Offaly, Republic of Ireland
+353 57 9321447   +353 57 9352180   info@qwikfixings.com
Telephone enquiries between 08.30 and 17.30 GMT
Outside of hours enquiries should be directed to an agent in your area
Web Design Ireland by Martec
Qwik-Fix Angle is an innovative 3-way adjustable system for supporting brick or rendered block panels over openings and above horizontal expansion joints. Our bracket and angle approach represents a significant advancement in masonry steel shelf angle design, as it contributes to rapid construction, ensures time and cost savings on site and provides consistently thin expansion joints. By reducing the contact area between the masonry and brick support angle and further providing thermal isolation shims, we significantly reduce thermal bridging associated with shelf angles