Individual Brackets

Individual brackets are designed to conform to BS EN 845-1 and provide masonry support above expansion gaps on radius walls and may be used as infill pieces on straight runs in certain circumstances. Individual brackets should be specified separately, citing loading specification, cavity width, supporting structure, desired fixing method and outside wall radius if applicable.

Example: You require Individual Brackets to carry a 14kN/m factored load over a 130mm cavity. You want to fix to a concrete slab using a high performance expansion bolt. The outside radius of your veneer wall is 3350mm. You require 6.5 linear metres of this specification:

Specify: Qwik-Fix Angle IB-K14-130-CN-EBCR-R3350 x 6.5 linear metres

 

 

 

Enquire
© 2010 Coughlan Engineering (Tullamore) Ltd t/a Qwik Fixings
Registered in Ireland # 281833
Riverside, Tullamore,
County Offaly, Republic of Ireland
+353 57 9321447   +353 57 9352180   info@qwikfixings.com
Telephone enquiries between 08.30 and 17.30 GMT
Outside of hours enquiries should be directed to an agent in your area
Web Design Ireland by Martec
Qwik-Fix Angle is an innovative 3-way adjustable system for supporting brick or rendered block panels over openings and above horizontal expansion joints. Our bracket and angle approach represents a significant advancement in masonry steel shelf angle design, as it contributes to rapid construction, ensures time and cost savings on site and provides consistently thin expansion joints. By reducing the contact area between the masonry and brick support angle and further providing thermal isolation shims, we significantly reduce thermal bridging associated with shelf angles