Fixings for Steel
Open Fixing:
The standard solution when fixing back to uncased
steel, the M12 stainless bolt can be used with all Qwik-Fix™ Angle
configurations.
|
Set Screws |
(OF) M12 A4 |
|
Design
Tensile Load (kN) |
25.2 |
|
Design Shear
Load (kN) |
17.4 |
Blind Fixing:
When fixing to blind box section, Qwik-Fix
recommends the use of the peg bolt, which is at least as strong as a standard
bolt and can be installed very efficiently.
|
Peg Bolt |
M12 A4 |
|
Minimum
Overall Length (mm) |
Fixing Thickness (mm) + 18 |
|
Design
Tensile Load (kN) |
9.8 |
|
Factor
of Safety – Tensile Load |
5 : 1 |
|
Design
Shear Load (kN) |
32.6 |
|
Factor
of Safety – Shear Load |
1.5 : 1 |
|
Drill
Hole Diameter (mm)* |
12 |
|
Minimum
Spacing (mm) |
35 |
|
Minimum
Edge Distances (mm) |
12 |
* The Peg Bolt should not be anchored
to irregular shaped holes or holes with clearances of greater than +0.1mm
Registered in Ireland # 281833
Riverside, Tullamore,
County Offaly, Republic of Ireland
+353 57 9321447 
+353 57 9352180 
info@qwikfixings.comTelephone enquiries between 08.30 and 17.30 GMT
Outside of hours enquiries should be directed to an agent in your area
Web Design Ireland by Martec